Top 8 Trusted Used Chassis Cab Suppliers

Yellow cab and chassis trucks with bare exposed frame rails parked in rows on a paved commercial vehicle lot

Four inches on the wheelbase once lost me a body order. My first email to used chassis cab suppliers asks for the frame drawing, not the cab spec. Bare chassis, in-house upfitting and the paperwork that travels with an unfinished vehicle are all covered across the eight channels below. A bare frame changes legal status once a body goes on, so certification of the finished vehicle comes last.

Quick Comparison Table

SupplierBase / MarketWhat I Can VerifyStock & Documentation
TrucksNLNetherlands / European marketplaceWheelbase, PTO and chassis length on individual advertsChassis cab listings from sellers across Europe, auction and direct-sale adverts side by side
STtruckExport platform, four chassis cabs in stock60+ point check with photos before any deposit6×4 and 8×4 chassis, export licence, invoice, packing list, certificate of origin
Truck Pages UKUnited KingdomWheelbase, MOT date and V5 registration field on individual adverts18 tonne chassis cab category, body-building offers on some listings
Lynch Truck CenterUnited States, three locationsCab chassis category, incomplete vehicle spec guidance, in-house upfit shopIsuzu, Hino, Ford and Class 7-8 chassis with stock numbers per unit
TransEdge Truck CentersUnited States, six Pennsylvania locationsCAB CHASSIS TRUCK category, DOT and pre-delivery inspectionsWheelbase changes, PTO and frame work at its own modification centre
Gassmann GmbHGermanySuperstructures built to buyer spec, own paint shop and speedometer inspectionMore than 2,000 commercial vehicles, export registration and customs formalities handled
Fontaine ModificationUnited States, ten centresPilot Review of the first vehicle on fleet orders, pre-delivery testingWheelbase changes, PTO installation, body company chassis prep, Ship-Thru delivery
TruckMaxUnited States, five Florida locations22-point inspection on used trucks, TRUCK CHASSIS ONLY categoryUsed cab and chassis units listed with mileage and engine spec

1. TrucksNL

Chassis cab adverts on TrucksNL are written for people who already know what body they intend to fit. I counted 1,224 advertisements in the category, with PTO, wheelbase and chassis length set out on individual listings instead of being saved for a phone call. Among used chassis cab suppliers, that is the fastest way I know to rule out a frame before contacting the seller.

What I Verified

  • Listings name the drive configuration, emission class, mileage and seller location for each chassis.
  • Auction adverts sit beside direct-sale ones, and a countdown of days left appears on the bidding entries.
  • Tax treatment is shown per advert according to the seller’s country, which matters when a chassis moves across a border.

When I Would Buy From Them

  • I compare several wheelbases here before a body designer is briefed.
  • I can bid on an auction entry or take a direct sale in the same category.

2. STtruck

My own workshop would start from one of the four chassis cabs in STtruck’s current stock. A bare frame has to reach a body builder with its dimensions and its export papers settled, so I check the company’s export history since 2018 before I book anything. Used chassis cab suppliers who leave that file until after payment do not get my first call; the 6×4 and 8×4 listings are the first split I make.

What I Verified

  • Filtering by body type and drive brings up the chassis cab listings with their frame dimensions, so my body builder sees the numbers before I write to anyone.
  • Photographs and a written condition report come back before I pay anything, and I read the frame rails in that set first.

When I Would Buy From Them

  • One stock list gives me a comparison set without chasing several sellers.
  • A mixed order pairing a chassis with a completed truck also works here.

3. Truck Pages UK

Body type is a real search filter on Truck Pages UK, not a phrase buried in a description. Its 18 tonne chassis cab category showed 15 adverts when I looked, and the ones worth reading give the wheelbase, the MOT date and the registration field in the same line. I check used chassis cab suppliers on that kind of detail, because a short wheelbase and a long one take very different bodies.

What I Verified

  • One DAF CF advert states a 6,600 mm wheelbase with rear air suspension, while a second lists 6.1 metres and notes that the test is still current.
  • A 2021 advert lists a 5.8 metre wheelbase, full air suspension and an MOT running to May 2027.
  • Body-building is offered on some listings, and auction entries show whether a V5 registration document is present.

When I Would Buy From Them

  • I can rule out a chassis with an expired test without writing to the seller.
  • I plan a collection near a British port from this category rather than from a wider European list.

4. Lynch Truck Center

Specifying the power take-off at order time is the advice Lynch Truck Center builds its cab chassis section around. Its own pages describe a chassis cab as a running vehicle delivered with bare frame rails, and explain how wheelbase, GVWR and PTO provision each change what can be mounted. Before I order from a US dealer I read the incomplete vehicle document required by 49 CFR 568.4, because it lists the GVWR, the axle ratings and the standards the unfinished chassis was built to, and the final-stage builder relies on it.

What I Verified

  • The cab chassis category lists units with individual stock numbers and their available location.
  • Chassis from Isuzu, Hino, Ford, Chevrolet, GMC and Ram appear alongside Class 7 and 8 makes in the commercial inventory.
  • An in-house upfit shop mounts the body and confirms the power take-off and hydraulic spec against that body.

When I Would Buy From Them

  • I bring a vocational build here when the PTO has to be ordered with the chassis.
  • Finishing the body in the same building saves me a second approval round, and I shortlist used chassis cab suppliers with an in-house upfit shop for that reason.

5. TransEdge Truck Centers

Cab chassis trucks sit at the top of the search list at TransEdge Truck Centers, ahead of box vans and dump bodies. The group runs six locations across Pennsylvania, and its own modification centre handles wheelbase changes, frame reinforcing and PTO installations before the truck reaches a body company. One site handling all of it answers a question I would otherwise have to put to two separate firms, and I rate used chassis cab suppliers on whether the modification stays in-house.

What I Verified

  • The modification centre is described as a 34,000 square foot facility with 20 additional truck bays and an on-site parts warehouse.
  • Pre-delivery inspection, DOT inspections and chassis GVW recertification are listed among its inspection services.
  • Modified chassis go back into the shipping network after the work, and delivery can run straight to a dealership or a body company.

When I Would Buy From Them

  • A wheelbase change before the body goes on belongs with the group that also handles the DOT inspection.
  • I also use this group when the truck will be registered in Pennsylvania, because the inspection work is done in-house.

6. Fontaine Modification

Fontaine Modification works after the factory rather than as a used truck lot, so it belongs on a chassis cab list. Established in 1985, the company runs modification centres beside OEM plants and offers chassis prep, PTO installation and wheelbase changes before a body ever arrives. For repeat orders I look for used chassis cab suppliers that will show me a documented first unit, and Fontaine does.

What I Verified

  • Ten modification centres are listed in the company’s own announcement, with headquarters and product development in Charlotte.
  • Body company chassis prep, drop-frame conversions, component relocation and frame extensions all appear in its chassis modification list.
  • For fleet orders a first truck is produced and thoroughly documented, and a Pilot Review with the customer is often held for new designs.

When I Would Buy From Them

  • Repeating one chassis conversion across a whole fleet calls for a documented first unit.
  • I would use the Ship-Thru arrangement when the chassis needs to go back into the maker’s delivery system after modification.

7. Gassmann GmbH

Gassmann GmbH sells the chassis and builds the body on the same site, so I read it as one of the few used chassis cab suppliers that can close an export order without a second handover. Its Bovenden workshop fits tipper, roll-off, tank, box and platform bodies to buyer specification. A chassis bound for the United States needs its engine paperwork settled at the border, so I read the EPA rules on importing vehicles and engines for the declaration forms and the heavy-duty engine categories that apply.

What I Verified

  • The company states it holds more than 2,000 commercial vehicles and construction machines on over 200,000 square metres.
  • Superstructures are built in its own master workshop, with bodies from Meiller, Schmitz, Carnehl, Atlas, Palfinger, Hyva, Sommer, Orten and Junge named.
  • Transfer, registration, shipping and all customs and export formalities are handled for the buyer, and every vehicle can be repainted or given a new speedometer inspection in-house.

When I Would Buy From Them

  • A specialist body fitted before the truck ships means I do not have to find a body builder at the destination.
  • I come here for a new paint finish or a fresh speedometer check before shipping.

8. TruckMax

TruckMax earns its place with a dedicated chassis-only category alongside its used truck stock in Florida. Each used cab and chassis advert gives the mileage, engine and stock number, and the group puts every used truck through a 22-point inspection before it reaches the inventory. I expect used chassis cab suppliers to publish that inspection count, because it gives me a number to ask about rather than a general promise of condition.

What I Verified

  • Five Florida locations are listed, at Miami, Homestead, Fort Pierce, Naples and Tampa.
  • Two 2016 Hino 195 cab and chassis units appear as separate adverts with their own stock numbers and recorded mileage.
  • The group is an authorised dealer for Isuzu, Volvo, Mitsubishi Fuso and Hino trucks and runs its own service and body department.

When I Would Buy From Them

  • For a body build starting from a used frame, the chassis-only adverts are the ones I open first.
  • I also check this stock when the truck will be serviced locally, because the group keeps its own workshops in the same state.

Summary

A bare frame is only worth buying once the wheelbase, the GVWR and the build sheet all match. I ask used chassis cab suppliers for that set before I contact a body builder, since an error on any one of them is hard to correct after the body is mounted. The workshop fitting the body needs the condition report and the export papers before cutting any metal, and I request both through the inquiry form.

Share:
Facebook
X
LinkedIn
Table of Contents
Need a specific unit?

Tell us the model, quantity and destination — we shortlist verified stock and send a condition report in 72 hours.

Related Articles

Three used dark blue 6x4 tractor units lined up at a commercial vehicle depot with a semi-trailer behind

Top 8 Trusted Used Tractor Truck Suppliers

Used tractor truck supplier reliability hinges heavily on pre-deposit documentation. A fleet manager I collaborate with once purchased six tractor units over a phone call and wasted the following month tracking down service records. That.....

White semi tractor truck parked at a freight depot

Top 8 Trusted Used Tractor Truck Suppliers in China

Ranking used tractor truck suppliers in China starts with one request, the papers for the exact unit, and last spring that lesson cost me three weeks. The tractor head I nearly bought looked right in.....

Two white crane trucks with folded blue loader cranes parked in a row on an industrial yard under a pale sky

Top 8 Trusted Used Crane Truck Suppliers

My shortlist of used crane truck suppliers stopped at eight, because those were the only dealers who named a specific crane and printed the figures that pin that machine down. The last machine I walked.....